◐ TYRE RETREADING SOLUTION-- Nondestructive laser- speckle inspection machine
◐ Nondestructive laser- speckle inspection machine/Introduction
The main features
NDT machine
Using holographic technology
"subtle-to-subtle-mouth" testing of tyres
Using laser diode probe
Online detection
System software displays detection images and results
High resolution
Automatic loading and unloading system
Used in medium tire turning factories
ITT CUBO 2500 testing machine adopts vacuum holography technology to be applied in tyre turning industry.
The machine can detect the stripping between the belt layer and the tread of the tyre before grinding and the final quality inspection after tyre refurbishment.The detection system consists of a complete laser diode probe.The detection principle is based on the comparison of the image of the first tire surface with that of the deformed tire surface after decompression.The operation screen shows the differences between the two conditions.The holographic detection function analyzes the condition of each part of the tire so that the operator can grasp the state of a single part or all parts on the operating screen.
The resolution of the machine image is from 2 to 5 mm square machine
The machine is equipped with an automatic retrieval system.Retrieve the three main dimensions required for the probe in the correct position:
Maximum tire face
Tyre outside diameter dimensions
Diameter size of submouth
Tire test time:
Tyre shoulder to tyre shoulder: 8 minutes, face analysis, 180 seconds
Subhead to subhead: 400 seconds for 8 minute end face analysis
The testing machine is equipped with tire loading and unloading system.
Another significant feature of the machine is the ability to find defects on the tested tire surface and the system software to measure the size of each defect as a means of online technical support.
Technical specifications:
Size (approx.)
2800 mm long
2800 mm wide
2100 mm high
Weight 3500 kg
Power supply: 7KW -- 380V500V50-60Hz three-phase power
Compression inflation: 8 -- 10bar
Tyre size:
15 inches to 24.5 inches
Maximum outside diameter: 1300mm
Maximum height: 550mm
Resolution: 2-5 mm square (one defect)
Detection method: automatic
Automatic test setting procedure: "tire shoulder to tire shoulder" or "child to child" analysis
Manual detection and setting system:
Manual probe positioning
Set the number of tire test ends
Set pressure
Set up the software interface system
Options:File Storage System (DVD)
Read-write curve cryptosystem
◐ Nondestructive laser- speckle inspection machine/Quotation
