PriceList for China Automatic Edge Banding Machine for Plywood MDF Wood PVC

Short Description:

optional Articulated manual buffing arm with 7.5kW drive motor

Applicability : 16"~24.5"

Tire Diameter : 750-1250mm

Tire Weight : Max 110Kg

Air pressure : 0.6~0.8MPa

Power : 52.5Kw

Weight : 4000kg

Outer Dimensions : 3500x3200x3200mm

Productivity : 15-20 piece/hour

Send email to us Download as PDF

Product Detail

Product Tags

It can be our duty to satisfy your preferences and successfully serve you. Your pleasure is our best reward. We have been looking forward to the go to for joint expansion for PriceList for China Automatic Edge Banding Machine for Plywood MDF Wood PVC, Our customers mainly distributed in the North America, Africa and Eastern Europe. we will source top quality goods using the really aggressive selling price.
It can be our duty to satisfy your preferences and successfully serve you. Your pleasure is our best reward. We have been looking forward to the go to for joint expansion for China Edge Banding Machine, Factory Direct Supplying, What is good price? We give customers with factory price. In the premise of good quality, efficiency need to be paid attention to and maintain appropriate low and healthy profits. What is a fast delivery? We make the delivery according to customers’ requirements. Although delivery time depends on the order quantity and the complexity of it, we still try to supply items in time. Sincerely hope we could have long term business relationship.

◐ Equipment Features

1. Automatic tire centering system

2.Automatic correction of the buffing profile to compensate any tire offset .Through three-axis servo motor linkage, achieve special curve grinding,grinding precision automatically.

3.Automatic detection of the rest rubber thickness & buffing-tire perimeter.To ensure stable grinding process.
Standard process requirements–
·The rest rubber thickness:2-2.5mm；
·The two shoulders circumference different ≤6mm.

4.With sidewall cleanning device controlled by servo motor for grinding sidewall with different size.

5.Gradle type lift to facilitate tire loading/unloading from the monorail system.

6.Blade cooling device reduces granding temperature and reduces blade wear.

7.The protection devices for safety protection.

8.Self diagnostic and troubles-shooting system.Remote diagnosis and debugging can be achieved.

Buffing station requirements

◐ Suggested configuration/tools

1. Exhaust and dust removal system

2. Taper and needle-nosed pliers (cut the leaking wire)

3. Tire marking chalk (mark the location of the wound, tread width, etc.)

4. Lubricating agent of expansion wheel (apply regularly)

5. Tire parameter table (input PC configuration table in advance, and call it out directly when polishing)

6. Tread base measuring ruler/pattern depth meter/flexible tape measure (can be used for phased detection)

7. RMA standard grinding roughness template (used to judge the wear of grinding tool head)

8. Goggles with side protection

9、Safety shoes

◐ Process conditions

1. Compressed air pressure: 5 ~ 8kg/cm

2.Tire inflation pressure: 1.5kg /cm2.

◐ Buffing position quality standard

1. after grinding the tire, the grinding surface should be maintained with a 1.5~2.5mm rubber layer.

2.After grinding , tire body line area for one place may not be greater than 1% of the area of the tyre abrasion；

Total out-line area shall not be greater than 2%, polishing line depth does not hurt cord fabric layer.

3.after grinding ,tire puncture holes and other defects of each tire shall not exceed 3, and the distance between the two wounds shall not be less than 1/6 of the tire circumference.

4. Grinding requirements:

4.1 grinding depth shall be controlled at 1.5-2mm.Rough finish of polished surface :RMA 3 ~ 5.

4.2 grinding surface deviation, tire crown grinding surface deviation is not greater than 1MM °

4.3 the width of the polished crown shall be equal to or less than 1/16 inch (2mm) of the base width of the tread, and the tread dimensions used shall be in accordance with the tire parameters (the grinding radius of the machine shall be set in accordance with the tire parameters).