◐ Special laser Coding Machine For The Tire
◐ Introduction
The core optical components of the special laser Coding machine for tires are imported from the United States, CO2 RF laser imported from the United States, American high-speed scanning mirror, high-speed, high-precision assembly line. The CO _ 2 RF laser is a gas laser with a wavelength of 10.64 μ m, which belongs to the mid-infrared band. The CO2 laser has high power and high electro-optic conversion rate. Carbon dioxide laser uses CO2 gas as working material. When the CO2 and other auxiliary gases are charged into the discharge tube, the gas molecules can release the laser when high voltage is added to the electrode and glow discharge is produced in the discharge tube. After expanding and focusing the laser energy released, the laser processing can be carried out by deflecting the scanning mirror.
◐ Features
1, excellent beam quality: smaller focus spot, better processing quality. 2, low cost: 90% photoelectric conversion efficiency, less than 1KW power consumption, no consumable material.
3, high efficiency, high speed: high power density, processing speed is3 times than the traditional laser.
4,low failure rate, long life: fiber grating instead of traditional resonator, no adjustment, life up to one hundred thousand hours.
5, extremely high stability, long warranty period of equipment, thoroughly solve the customer's worries.
1stversion:BEST-CWH001-40W
USEED IN Warehouse
◐ Structure Of The Equipment
The equipment mainly includes includes the double lens laser coding machine,infrared focusing indicator probes the base(lampstand), tire ejection mechanism (including ejection cylinder and hand control valve), rollers assembly, tire clamping device (including clamping screw and handwheel), bridge base(lampstand) ,etc.
◐ Operating Process
1-The tire is pushed uphill at the equipment in the warehouse to reach the top of the roller assembly.
2-Turn the manual control valve of the tire clamping device, fasten the tire to the center position, and the crutchs fasten the tire at the same time so that the tire will not tilt and skew.
3-Rotate the tire to the desired marking position (you can choose any clock directions, such as 6 o'clock); The height of the lens on both sides is adjusted to the marking position by the vertical column hand wheel, and the focal length of the lens on both sides is adjusted by the width-adjusting hand wheel (set with infrared focal length indicator lights). After focusing on both sides, the marking machine completes the marking.
4-The tire ejection cylinder extends, pushes the tire into the bridge base, and the tire leaves the marking station through the bridge structure.
◐ Materials And Accessories
1-The materials of the base, bridge, clamping plate and other structural are q235b high quality carbon structural steel, screw, roller material is 45 # high quality carbon structural steel. According to the need to spray paint, blackening, electroplating and other surface treatment.
2- The brand of cylinder&control valves : Yadke.
3-Bearings selected from the domestic well-known manufacturers, the strength grade of screws :8.8.
◐ Technical Parameters
Equipment length :2500 mm,
Width:500mm (excluding laser marking machine)
Tire height from the ground: 260mm
| Model | BEST-CWH001-40W |
| Laser wave length | 10.6um |
| Repeat frequency rate | 1-20KHz |
| Beam quality | M2<1.5 |
| Speed | ≤7000mm/s |
| Size of code | 110*110，150*150,175*175 |
| Depth | ≤3mm |
| Width of line | 0.01mm |
| Repeatability precision | ±0.01mm |
| Minimum character | 0.4mm |
| Cooling-down method | forced air cooling |
| Input voltage | AC110-250V50Hz |
| Machine consumption | <1kw |
◐ Pictures fFrom Customers
◐ The Quality Advantage Of Special laser Coding Machine For Tire
1-The strong technical team and strong technical background determine its technical advantage in the special field of laser equipment.
2-Domestic top-level configuration, domestic top-end configuration.
3-Top-level production testing equipment and strict quality system to ensure the excellent quality of the product.
4-Solemn commitment, complete warranty for three years.
◐ Note
Can be customized for coding different materials, such as metal, wood, rubber and plastic.
Can be customized according to customer needs and application NEEDS
